|
|
|
National Stock Number:
5365-01-529-4806
Federal Supply Class:
5365
National Item Identification Number:
015294806
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 20015102 | 18894 | AIR ARMAMENT CENTER/ EN | | 20015102-01 | 1XPL6 | TYONEK FABRICATION CORPORATION | | 20015102-01 | 98752 | WARNER ROBINS AIR LOGISTICS CENTER |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 1.210 INCHES MINIMUM AND 1.230 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 3 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM | | HOLE DIAMETER | 0.530 INCHES MINIMUM AND 0.539 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | OVERALL LENGTH | 7.970 INCHES MINIMUM AND 8.030 INCHES MAXIMUM | | OVERALL THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM | | OVERALL WIDTH | 2.410 INCHES MINIMUM AND 2.470 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY 6061 | | SPECIAL FEATURES | MATERIAL SPEC IS 6060-T6 PLATE ALUMINUM | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|