|
|
|
National Stock Number:
5365-01-529-4422
Federal Supply Class:
5365
National Item Identification Number:
015294422
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| NAS1401-3D5G | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| APERTURE DIAMETER | 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | AGAV | | OUTSIDE CORNER RADIUS | 0.160 INCHES NOMINAL | | OVERALL LENGTH | 0.430 INCHES MINIMUM AND 0.490 INCHES MAXIMUM | | OVERALL THICKNESS | 0.156 INCHES NOMINAL | | OVERALL WIDTH | 0.430 INCHES MINIMUM AND 0.490 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4.QQ-A-250/4TS351 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | SPECIAL FEATURES | USES TWO COATS OF PRIMER | | STYLE DESIGNATOR | NON-CIRCULAR W/O BOLT HOLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-PRF-85582 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE OR CHROMATE AND PRIMER |
|
|