|
|
|
National Stock Number:
5365-01-355-3689
Federal Supply Class:
5365
National Item Identification Number:
013553689
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 12909207 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.810 INCHES NOMINAL | | CONSTRUCTION | ONE-PIECE | | FEATURES PROVIDED | SEPARABLE | | LAMINATION QUANTITY | 83 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | LARGEST BOLT HOLE DIAMETER | 1.000 INCHES MINIMUM AND 1.060 INCHES MAXIMUM | | LARGEST BOLT HOLE QUANTITY | 2 | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.750 INCHES NOMINAL | | OVERALL LENGTH | 6.870 INCHES MINIMUM AND 6.930 INCHES MAXIMUM | | OVERALL WIDTH | 1.590 INCHES MINIMUM AND 1.650 INCHES MAXIMUM | | SMALLEST BOLT HOLE DIAMETER | 0.690 INCHES MINIMUM AND 0.720 INCHES MAXIMUM | | SMALLEST BOLT HOLE QUANTITY | 1 |
|
|