|
|
|
National Stock Number:
5365-01-355-1453
Federal Supply Class:
5365
National Item Identification Number:
013551453
Description:
SHIM
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 12910566-6 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | HOLE DIAMETER | 0.928 INCHES MINIMUM AND 0.952 INCHES MAXIMUM | | OVERALL LENGTH | 13.608 INCHES MINIMUM AND 13.632 INCHES MAXIMUM | | OVERALL WIDTH | 2.002 INCHES MINIMUM AND 2.026 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC ALL MATERIAL RESPONSES OR MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 302 OR STEEL COMP 304 | | SLOT DEPTH | 0.883 INCHES MINIMUM AND 0.907 INCHES MAXIMUM | | SLOT QUANTITY | 3 | | SLOT WIDTH | 0.428 INCHES MINIMUM AND 0.452 INCHES MAXIMUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM | | SPECIAL FEATURES | ONE SLOT CONNECTED TO CENTER BOLT HOLE,NOT CENTRALLY LOCATED |
|
|