|
|
|
National Stock Number:
5365-01-348-5489
Federal Supply Class:
5365
National Item Identification Number:
013485489
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 9076084-01 | 98748 | AIR FORCE UNITED STATES DEPARTMENT OF THE DBA TINKER AFB OC ALC DSP |
|
Techincal Specification:
| APERTURE DIAMETER | 1.986 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 2.875 INCHES NOMINAL | | BOLT HOLE QUANTITY | 6 | | HOLE DIAMETER | 0.220 INCHES NOMINAL | | OUTSIDE DIAMETER | 3.375 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 304 | | SPECIAL FEATURES | INSIDE DIAMETER IS STEPPED; THE 1.986 DIA IS 0.103 IN. THICK,STEPPED DIA IS 2.375 PORM 0.008 IN. AND 0.122 IN. THICK; SMALLER INSIDE DIA HAS 32.0 MICROINCH FINISH AND LARGER INSIDE DIA HAS 63.0 MICROINCH FINISH | | STYLE DESIGNATOR | CIRCULAR |
|
|