|
|
|
National Stock Number:
5340-01-523-0974
Federal Supply Class:
5340
National Item Identification Number:
015230974
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 9809-1007-1 | 12115 | DRS ICAS, LLC |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 2.695 INCHES MINIMUM AND 2.725 INCHES MAXIMUM | | CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.063 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.552 INCHES MINIMUM AND 0.612 INCHES MAXIMUM | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.390 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 1.250 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.147 INCHES MINIMUM AND 0.150 INCHES MAXIMUM | | FIRST LEG WIDTH | 1.050 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.063 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 1.250 INCHES NOMINAL | | SPECIAL FEATURES | ITEM HAS 4 SLOTTED HOLES DIA. 0.096 CSK 0.172 X 100 DEG. FARSIDE THAT ARE 0.146 POM .005 IN. IN LENGTH, 0.104 TO 0.111 IN. WIDE; EA HOLE REQUIRES SELF CLINCHING NUTS, P/N SC5310-0076-3 | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|