| FIRST LEG ANGLE | 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.550 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.200 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.370 INCHES NOMINAL |
| FIRST LEG END RADIUS | 0.375 INCHES NOMINAL |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T4 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| SECOND LEG LENGTH | 1.870 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG END RADIUS | 0.375 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.750 INCHES NOMINAL |
| SPECIAL FEATURES | COLOR GRAY |
| STYLE DESIGNATOR | ANGLE |
| SUPPLEMENTARY FEATURES | SERVES AS ANCHOR POINT FOR SAFETY WIRING JAM NUTS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY2,CL1 MIL SPEC 1ST TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE AND PRIMER EPOXY AND ENAMEL |