| DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.312 INCHES NOMINAL |
| DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.499 INCHES NOMINAL |
| DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.969 INCHES NOMINAL |
| BLOCK HEIGHT | 0.625 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES | 3.235 INCHES MINIMUM AND 3.265 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 1.375 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 2.307 INCHES MINIMUM AND 2.327 INCHES MAXIMUM |
| CLAMPING HOLE DIAMETER | 0.560 INCHES NOMINAL ALL HOLES |
| CLAMPING HOLE QUANTITY | 4 |
| OVERALL LENGTH | 4.190 INCHES MINIMUM AND 4.310 INCHES MAXIMUM |
| OVERALL WIDTH | 0.560 INCHES MINIMUM AND 0.680 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8 T6 OR T6511 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/11 T651 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/9 T5 FED SPEC 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 |
| MOUNTING FACILITY | UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.342 INCHES MINIMUM AND 0.372 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 2 |
| STYLE DESIGNATOR | RECTANGULAR |