| CENTER SECTION WIDTH | 0.374 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 2.540 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.160 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.270 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.910 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.138 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.374 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T651 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | THREADED |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.910 INCHES NOMINAL |
| SPECIAL FEATURES | FURN W/TWO 0.138-32 UNC-2B HELICOIL INSERTS PER MS33537 INSTALLED IN LEG HOLES; TWO ADDITIONAL HOLES IN BRACKET MIDSECTION (0.154-0.159 IN. THRU AND 0.280 IN. X 82 DEGREE COUNTERSINK ); OUTER EDGE OF EACH BRACKET LEG IS CHAMFERED 0.120 IN. X 45 DEGREES |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |