| CENTER SECTION HEIGHT | 3.440 INCHES MINIMUM AND 3.560 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.250 INCHES NOMINAL |
| CENTER SECTION WIDTH | 0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG LENGTH | 0.880 INCHES MINIMUM AND 1.120 INCHES MAXIMUM |
| FIRST LEG END WIDTH | 0.620 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A576 COMP 1010-1026 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | THREADED |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.500 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.820 INCHES MINIMUM AND 2.940 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG END WIDTH | 0.620 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.250 INCHES NOMINAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM |
| SPECIAL FEATURES | TWO HOLES ON CENTER SECTION,THREADED 0.250-20 UNC-2B |
| STYLE DESIGNATOR | ADJACENT ANGLES |