| CENTER SECTION HEIGHT | 2.474 INCHES MINIMUM AND 2.526 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.113 INCHES MINIMUM AND 0.137 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 26.500 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG LENGTH | 1.486 INCHES MINIMUM AND 1.514 INCHES MAXIMUM |
| FIRST LEG WIDTH | 24.000 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.113 INCHES MINIMUM AND 0.137 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8,T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/9,T5 FED SPEC 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 |
| MOUNTING HOLE TYPE | PLAIN AND THREADED |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 1.486 INCHES MINIMUM AND 1.514 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 0.113 INCHES MINIMUM AND 0.137 INCHES MAXIMUM |
| SPECIAL FEATURES | CENTER SECTION W/2 HOLES PLAIN 0.203 IN. DIA,1 HOLE THD 0.250-20 UNC-2B |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |