|
|
|
National Stock Number:
5320-00-757-5502
Federal Supply Class:
5320
National Item Identification Number:
007575502
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 100-047-6-3 | 97499 | BELL TEXTRON INC | | HL21-6-3 | 07084 | HI-SHEAR INDUSTRIES INC | | HL21PB-6-3 | 06725 | SPS TECHNOLOGIES, LLC | | HL21PB-6-3 | 17446 | HUCK INTERNATIONAL, INC | | HL21PB-6-3 | 60516 | WEST COAST AEROSPACE, INC. | | HL21PB-6-3 | 73197 | HI-SHEAR CORPORATION | | HL21PB-6-3 | A0126 | LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE | | HL21PB-6-3 | A0311 | TECNO TRADE S.R.L. | | HL21PB-6-3 | C4293 | ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH | | HL21PB6-3 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL21PB6-3 | 0PTK6 | SPS TECHNOLOGIES INC | | HL21PB6-3 | 56878 | SPS TECHNOLOGIES, LLC | | HL21PB6-3 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL21PB6-3 | 97928 | HUCK INTL INC | | HS6066-6-3 | 8V613 | THE BOEING COMPANY |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.502 INCHES MINIMUM AND 0.522 INCHES MAXIMUM | | GRIP LENGTH | 0.192 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.377 INCHES MINIMUM AND 0.381 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD SIZE | 0.190 INCHES | | SHANK DIAMETER | 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | WIDTH BETWEEN FLATS | 0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNJF |
|
|