| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT HEIGHT | 0.383 INCHES MAXIMUM |
| NUT LENGTH | 1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| LUBRICATION | DRY FILM LUBRICANT |
| MATERIAL | STEEL COMP 4130 NUT OR STEEL COMP 8740 NUT |
| MATERIAL | STEEL COMP 631 CHANNEL |
| MATERIAL | STEEL COMP 631 SHELL |
| MATERIAL | STEEL COMP 631 SPRING |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| PLATE THICKNESS | 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM |
| PLATE WIDTH | 0.865 INCHES MAXIMUM |
| THREAD SERIES | UNJF |
| THREAD QUANTITY PER INCH | 32 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE CHANNEL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT | CADMIUM NUT |
| SURFACE TREATMENT | PASSIVATE CHANNEL |
| SURFACE TREATMENT | PASSIVATE SHELL |
| SURFACE TREATMENT | PASSIVATE SPRING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3B |