|
|
|
National Stock Number:
5310-01-529-7197
Federal Supply Class:
5310
National Item Identification Number:
015297197
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 03309-26 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | 95630A475 | 3A054 | MCMASTER-CARR SUPPLY CO | | GD01010882 | KCPX0 | GENERAL DYNAMICS UNITED KINGDOM LTD |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | COLOR | WHITE OVERALL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.281 INCHES NOMINAL | | OVERALL DIAMETER | 0.735 INCHES NOMINAL | | MATERIAL | PLASTIC POLYCHLOROTRIFLUOROETHYLENE OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WHITE PFTE FLAT WASHER | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | USE UP TO 500 DEG F | | THICKNESS | 0.062 INCHES NOMINAL |
|
|