|
|
|
National Stock Number:
5310-01-354-8777
Federal Supply Class:
5310
National Item Identification Number:
013548777
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| G374-5 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| HOLE DIAMETER | 0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM | | OVERALL DIAMETER | 0.682 INCHES MINIMUM AND 0.707 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1020 OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC ALL TREATMENT RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THICKNESS | 0.065 INCHES NOMINAL |
|
|