|
|
|
National Stock Number:
5310-01-348-6166
Federal Supply Class:
5310
National Item Identification Number:
013486166
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 211050332 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 211056661 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 801-6408783 FIND 23 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.465 INCHES MINIMUM AND 0.475 INCHES MAXIMUM | | OVERALL DIAMETER | 1.120 INCHES MINIMUM AND 1.130 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
|
|