|
|
|
National Stock Number:
5310-01-340-5084
Federal Supply Class:
5310
National Item Identification Number:
013405084
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 13D0021-016 | 0F658 | AMERICAN METALS & MACHINING | | 13D0021-016 | 1Z537 | BUENA PARK TOOL & ENGINEERING INC DBA BUENA PARK TOOL | | 13D0021-016 | 31638 | WOODRUFF CORPORATION | | 13D0021-016 | 59563 | REID PRODUCTS INC. | | 13D0021-016 | 64106 | AM MACHINING, INC. | | 13D0021-016 | 86928 | SEASTROM MANUFACTURING CO INC | | 13D0021-016 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.516 INCHES NOMINAL | | OVERALL DIAMETER | 0.687 INCHES MINIMUM AND 0.693 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303SE OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.109 INCHES NOMINAL |
|
|