|
|
|
National Stock Number:
5306-01-588-8100
Federal Supply Class:
5306
National Item Identification Number:
015888100
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| MS9111-04 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | SAE-AS91111-04 | 0U583 | SAE INTERNATIONAL | | SAE-AS91111-04 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 0.438 INCHES NOMINAL | | EXTENDED WASHER THICKNESS | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | FASTENER LENGTH | 0.750 INCHES NOMINAL | | GRIP DIAMETER | 0.2494 INCHES MINIMUM AND 0.2499 INCHES MAXIMUM | | GRIP LENGTH | 0.125 INCHES NOMINAL | | HEAD HEIGHT | 0.330 INCHES NOMINAL | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | MATERIAL DOCUMENT AND CLASSIFICATION | A-55731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | WIDTH BETWEEN FLATS | 0.305 INCHES MINIMUM AND 0.313 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.625 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 28 |
|
|