| FASTENER LENGTH | 1.953 INCHES NOMINAL |
| HEAD HEIGHT | 0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| HEAD STYLE | HEXAGON |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,ASSEMBLY - SUPPORT EQUIPMENT,CRES |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059, COND A MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764, COND A FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
| MATERIAL | IRON ALLOY 660 FASTENER |
| MATERIAL | STEEL COMP 301 PRIMARY WASHER |
| MATERIAL | STEEL COMP 303SE STAND-OFF |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.375 INCHES |
| PRIMARY WASHER MATERIAL THICKNESS | 0.032 INCHES NOMINAL |
| PRIMARY WASHER OUTSIDE DIAMETER | 0.600 INCHES NOMINAL |
| PRIMARY WASHER STYLE | FINISHING |
| SPECIAL FEATURES | FURNISHED WITH ONE SHEAR BOLT; 5306-01-464-0605, ONE SPACER 5365-01-331-9515; ONE TAB 4030-01-325-2632 AND ONE WASHER 5310-01-335-2950 |
| WASHER QUANTITY | 1 |
| WIDTH BETWEEN FLATS | 0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.578 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNJF |