|
|
|
National Stock Number:
5306-01-355-1423
Federal Supply Class:
5306
National Item Identification Number:
013551423
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| MS14181H04012 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM | | FASTENER LENGTH | 1.255 INCHES MINIMUM AND 1.285 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | HEAD HEIGHT | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | HEAD MINOR DIAMETER | 0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | HEAD STYLE | SPLINE EXTENDED WASHER | | HOLE CONFIGURATION STYLE | SPLINE | | HOLE DIAMETER | 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM | | HOLE QUANTITY | 4 | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 718 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.495 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 28 |
|
|