|
|
|
National Stock Number:
5306-01-348-7086
Federal Supply Class:
5306
National Item Identification Number:
013487086
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 03A100-8D22 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | 03A100-8D22 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 123711-8D22 | 56878 | SPS TECHNOLOGIES, LLC | | AIC1655-8D22 | 06725 | SPS TECHNOLOGIES, LLC | | MB211-8D22 | 73197 | HI-SHEAR CORPORATION | | MB211-8D22 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | PBF1422-8D22 | 27624 | SPS TECHNOLOGIES LLC | | SII1185-8D22 | 57928 | SONIC INDUSTRIES, INC. | | VCG0017-8D22 | 06710 | VALLEY-TODECO, INC. | | VS3320-8D22 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VS3320-8D22 | 9N513 | VOI-SHAN/CHATSWORTH DIV OF VSI CORP SUB OF FAIRCHILD INDUSTRIES INC | | X385-8D22 | 17446 | HUCK INTERNATIONAL, INC | | X385-8D22 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.909 INCHES MINIMUM AND 1.917 INCHES MAXIMUM FIRST HOLE | | EXTENDED WASHER DIAMETER | 0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.092 INCHES MINIMUM AND 0.112 INCHES MAXIMUM | | FASTENER LENGTH | 2.140 INCHES MINIMUM AND 2.170 INCHES MAXIMUM | | GRIP DIAMETER | 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM | | GRIP LENGTH | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM | | HEAD HEIGHT | 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM | | HEAD MINOR DIAMETER | 0.644 INCHES NOMINAL | | HEAD STYLE | SPLINE EXTENDED WASHER | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 718 OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.500 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.780 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 20 |
|
|