|
|
|
National Stock Number:
5306-01-063-3787
Federal Supply Class:
5306
National Item Identification Number:
010633787
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 5306PL1497632 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | MS21296-09028 | 06725 | SPS TECHNOLOGIES, LLC | | MS21296-09028 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS21296-09028 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | PBFMS21296-09028 | 27624 | SPS TECHNOLOGIES LLC |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 1.037 INCHES MINIMUM AND 1.047 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.071 INCHES MINIMUM AND 0.091 INCHES MAXIMUM | | FASTENER LENGTH | 2.765 INCHES MINIMUM AND 2.795 INCHES MAXIMUM | | GRIP DIAMETER | 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM | | GRIP LENGTH | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM | | HARDNESS RATING | 51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM | | HEAD STYLE | SPLINE EXTENDED WASHER | | MATERIAL | STEEL COMP H11 OVERALL | | NOMINAL THREAD DIAMETER | 0.562 INCHES | | WIDTH BETWEEN FLATS | 0.610 INCHES MINIMUM AND 0.625 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.005 INCHES MINIMUM AND 1.055 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 18 |
|
|