|
|
|
National Stock Number:
5305-01-356-1933
Federal Supply Class:
5305
National Item Identification Number:
013561933
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| ST3M430V6-7AS | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.078 INCHES MINIMUM AND 1.109 INCHES MAXIMUM | | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM | | GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM | | HEAD DIAMETER | 0.7556 INCHES MINIMUM AND 0.7604 INCHES MAXIMUM | | HEAD HEIGHT | 0.1147 INCHES MINIMUM AND 0.1167 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL | TITANIUM OVERALL | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.641 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|