|
|
|
National Stock Number:
5305-01-348-8497
Federal Supply Class:
5305
National Item Identification Number:
013488497
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 03A248TS3-10-A-5.5 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 03A248TS3-A-5.5 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | CS6036TS-3-10-5.5 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | CS6036TS-3-A-5.5 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | DPYS70--TS-10-A- | 0HDW7 | HUCK INTERNATIONAL, INC. | | DPYS70--TS-10-A- | 97928 | HUCK INTL INC | | DPYS7900TS-10-A-5.5 | 0HDW7 | HUCK INTERNATIONAL, INC. | | DPYS7900TS-10-A-5.5 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.837 INCHES MINIMUM AND 0.857 INCHES MAXIMUM | | HEAD DIAMETER | 0.375 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL ACCOMMODATED THICKNESS | 0.075 INCHES MINIMUM AND 0.089 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFFAMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | MATERIAL | STEEL COMP 304 STAND-OFFIRON ALLOY 660 FASTENER | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD LENGTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 32 |
|
|