|
|
|
National Stock Number:
5305-01-348-7812
Federal Supply Class:
5305
National Item Identification Number:
013487812
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 03A173-3-4P | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | 03A173-3-4P | 76825 | AMERICAN-MARSH PUMPS INC NOVO PUMP AND ENGINE DIVISION | | 123742-3-4P | 80539 | SPS TECHNOLOGIES, LLC | | AIC1651-3-4P | 06725 | SPS TECHNOLOGIES, LLC | | BF0015HC3A-3-4 | 62384 | LFC INDUSTRIES INC. | | E008-3-4P | 17446 | HUCK INTERNATIONAL, INC | | E008-3-4P | 97928 | HUCK INTL INC | | HR239-3-4P | 73197 | HI-SHEAR CORPORATION | | HR239-3-4P | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | PBF1416-3-4P | 27624 | SPS TECHNOLOGIES LLC | | SC3103-3-4P | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | SLB216-3-4P | 16258 | SPACE-LOK, INC. |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.580 INCHES MINIMUM AND 0.610 INCHES MAXIMUM | | GRIP DIAMETER | 0.885 INCHES MINIMUM AND 0.895 INCHES MAXIMUM | | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | HEAD DIAMETER | 0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.345 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|