5305-01-340-6194, SCREW,EXTERNALLY RELIEVED BODY

5305-01-340-6193 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-340-6194

Federal Supply Class:
5305

National Item Identification Number:
013406194

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

M86K0007-5	12464	MCDONNELL DOUGLAS CORP MCDONNELL DOUGLAS ELECTRONIC SYSTEMS CO
M86K0007-8	12464	MCDONNELL DOUGLAS CORP MCDONNELL DOUGLAS ELECTRONIC SYSTEMS CO

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.899 INCHES NOMINAL
COLOR	BLACK OVERALL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	1.579 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HARDNESS RATING	80.0 ROCKWELL C MINIMUM OVERALL
HEAD DIAMETER	0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT	0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	HEXAGON
MATERIAL	STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH	30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.164 INCHES
WIDTH ACROSS FLATS	0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-13924,CL4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	OXIDE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.680 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial