|
|
|
National Stock Number:
3120-01-348-8583
Federal Supply Class:
3120
National Item Identification Number:
013488583
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 700150-11 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| DIAMETER | 3.5850 INCHES NOMINAL | | CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | MATERIAL DOCUMENT AND CLASSIFICATION | MONEL,CAGEC 28553 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 3.8820 INCHES MINIMUM AND 3.9220 INCHES MAXIMUM | | OVERALL THICKNESS | 0.0230 INCHES MINIMUM AND 0.0250 INCHES MAXIMUM | | SPECIAL FEATURES | SPLIT | | STYLE DESIGNATOR | ROUND | | SURFACE FINISH | 32.0 MICROINCHES LARGEST OUTSIDE DIAMETER32.0 MICROINCHES LEFT SIDE32.0 MICROINCHES RIGHT SIDE |
|
|