|
|
|
National Stock Number:
3040-01-348-9526
Federal Supply Class:
3040
National Item Identification Number:
013489526
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10107271 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 109183 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.0350 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 0.5417 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 1.5000 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.5808 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.4433 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 13 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 1.035 INCHES NOMINAL | | OVERALL LENGTH | 4.100 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | 11599-109183,AMS 6485 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DIAMETER | 1.0350 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.7400 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 14 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.8750 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.5350 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.9350 INCHES NOMINAL | | STEP QUANTITY | 1 |
|
|