|
|
|
National Stock Number:
3040-01-348-8027
Federal Supply Class:
3040
National Item Identification Number:
013488027
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3880726 | 99193 | HONEYWELL INTERNATIONAL INC. | | 3880726-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.4550 INCHES MINIMUM AND 0.4650 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.681 INCHES MINIMUM AND 0.691 INCHES MAXIMUM | | OVERALL LENGTH | 2.100 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6265 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SPECIAL FEATURES | 1ST END INT SPLINED,9 TEETH,32/64 PITCH,30 DEG PRESSURE ANGLE,0.3125 IN.MAJ DIA,SPLINES BEGIN 0.285 IN.FROM END | | SECOND END HOLE DIAMETER | 0.1603 INCHES MINIMUM AND 0.1613 INCHES MAXIMUM | | SECOND END DIAMETER | 0.4991 INCHES MINIMUM AND 0.4994 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.1880 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | STEP QUANTITY | 4 |
|
|