|
|
|
National Stock Number:
3040-00-758-0339
Federal Supply Class:
3040
National Item Identification Number:
007580339
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| XV09-005-36 | 25169 | PROJECT MANAGER AMPHIBIOUS LIGHTERS ST LOUIS MO |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.8710 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 2.625 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.6390 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 1.4450 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 10 | | FIRST END STYLE | SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 3.000 INCHES NOMINAL | | OVERALL LENGTH | 13.188 INCHES NOMINAL | | MATERIAL | STEEL COMP 4140 | | SECOND END GROOVE DIAMETER | 1.3280 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1250 INCHES NOMINAL | | SECOND END DIAMETER | 1.8710 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.423 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 2.031 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.6250 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 1.5000 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 16 | | SECOND END STYLE | CIRCULAR GROOVED AND SPLINED (STRAIGHT) | | STEP QUANTITY | 7 |
|
|